As I get older the most important part of fishing isn't catching fish. It's the sharing of experiences with good friends. I hope to fish with some of you in the near future. Paul
Sunday, October 19, 2014
Fall Fly Fishing with Friends 2014
As I get older the most important part of fishing isn't catching fish. It's the sharing of experiences with good friends. I hope to fish with some of you in the near future. Paul
Paul's November 2014 Fly of the Month
Small Fry - A great "cross over" fly.
Small Fry Salt Water Version
Hook: Mustad 34077 or similar – size
to match forage fish (Pictured is tied on Size 4 hook).
Thread: Mono, 3/0 thread, flat waxed nylon, or Fly
Master Plus, with color to match wing.
Belly(underwing): White buck
tail.
Flash: A few strands of holographic tinsel and pearl
flash.
Wing: Sparse layer of pink buck tail topped by a
heavier layer of olive buck tail.
Eyes: 3 D adhesive eyes.
Epoxy or Resin: Cover eyes and half of the body with 5 minute
epoxy or “light curing” resin.
Small Fry Salt Water “Jig” Version
Hook: Mustad 34184 or similar – size
to match forage fish (Pictured is tied on Size 1/0 hook).
Thread: Mono, 3/0 thread, flat waxed nylon, or Fly
Master Plus, with color to match wing.
Weight: Lead (.035 - approximately 10 wraps) on 1/3 of the
hook shank closest to the bend before the eye.
Belly(underwing): White buck
tail.
Flash: A few strands of holographic tinsel and pearl
flash.
Wing: Sparse layer of pink buck tail topped by a
heavier layer of olive buck tail.
Eyes: 3 D adhesive eyes.
Epoxy or Resin: Cover eyes and half of the body with 5 minute
epoxy or “light curing” resin.
Small Fry Fresh Water Streamer
Hook: Diachi 2220 4x long hook or
similar – size to match forage fish (Pictured is tied on Size 6 hook).
Thread: Mono, 3/0 thread, flat waxed nylon, or Fly
Master Plus, with color to match wing.
Belly(underwing): White buck
tail.
Flash: A few strands of holographic tinsel and pearl
flash.
Wing: Sparse layer of pink buck tail topped by a
heavier layer of olive buck tail.
Eyes: 3 D adhesive eyes.
Epoxy or Resin: Cover eyes and half of the body with 5 minute
epoxy or “light curing” resin.
There are 3 different flies
here with a basic pattern recipe. All
work great. I started tying this fly
after seeing friends from CT/RI Fly Fishers fishing it in the salt. Not only is this a great fly to imitate small
bait fish, it’s also a great fresh water streamer. I’ve caught some nice trout
on it. I also experimented with it by
tying it larger and heavier on a jig hook and did well on that. In the salt I fish it with slow small
twitches, especially when I get close to the end of my retrieve.
Begin by covering the first 3rd
of the hook shank (near the eye of the hook) with thread.
Jig Fly - If you’re tying
the jig fly remember that you will be tying this pattern on an inverted
hook. The fly is going to ride upside
down similar to a clouser minnow. You also must cover the thread with wrapped
lead.
Next, tie in your white buck
tail belly. On the small salt water fly,
and the trout streamer, the belly is tied in sparse. Now it’s time to tie in your wing. Tie in a few strands of holographic tinsel
and pearl flash. Not much is
needed. Next, tie in a sparse layer of
pink buck tail. On top of that is a
heavier clump of olive buck tail. Form a
head with tying thread. Tie and clip off
the thread. Add your 3 D adhesive eyes. Coat the eyes and body from the eye of the
hook to half way down the hook shank.
This fly can also be viewed
at the Housatonic Fly Fishermen’s Association website at www.hffa.net
. If you have
any questions about this fly or would like to submit a Fly of The Month I can be reached at
203 305-3850 or e-mail me at pdinice@frontier.com .
Monday, September 22, 2014
Paul's October 2014 Fly of the Month
Missing Link Caddis
Hook: Size #15-#17 Tiemco 102Y.
Tying
thread: Uni-Thread 8/0 in camel.
Abdomen: Thread.
Rib: Single strand of pearl Flasabou or Krystal
Flash.
Abdomen Coating: Softex, Flexcement, or Hard As Nails.
Dubbing
Ball: Peacock Ice Dub.
Downwings: Dun Z-lon.
Downwings: Dun Z-lon.
Upwing: Elk or coastal deer hair with dark tips.
Hackle: Blue dun saddle hackle.
This pattern has a few more
extra steps and ingredients than most caddis dry flies. It’s well worth the effort to catch finicky
trout. The first thing you’ll notice
about this fly is that it’s tied on a Tiemco 102Y hook. This is a barbless, black, and odd # sized
hook. It’s easy to find and readily
available. Also, this fly has swept back
wings and hackle around the deer hair wing.
The fly floats like a cork. The
swept back wings mimic dead or dying caddis on the water. Everything about this fly is a little
different from the norm. That’s good
when fishing TMA’s. Trout get more
finicky as a hatch goes on. At times you
have to toss something different at them.
Begin by starting your thread
1/3 down the hook shank and cover the hook shank half way into the bend of the
hook. Tie in your strand of Krystal
Flash and rib the thread body you’ve created. Tie and trim off your rib. At the end of the body dub a little ball of
Peacock Ice Dub. In front of it tie in a
sparse wing of dun z-lon. The wing
should flare in two segments sweeping back towards the end of the hook. Clip the wings so that they are the length of
the hook bend. Tie in your Elk or
Coastal Deer hair wing just as you would for most caddis imitations. Tie in your dun saddle hackle. Wrap the hackle “parachute style” around the
elk/deer hair wing including the butts.
Your wing and butts will become elevated and have a higher profile. You can now trim the butts of the hair
wing. Be careful not to trim any
hackle. Whip finish the fly and you’re
done.
A video of how to tie the
Missing Link Caddis can be found below.
If
you have any questions about this fly or would like to submit a Fly of the
Month, I can be reached at 203 305-3850 or e-mail me at pdinice@frontier.com . This pattern can also be
viewed at www.hffa.net .
Monday, August 25, 2014
Paul's September 2014 Fly of the Month
Torrey's Bead Head Hares Ear Caddis
Hook: Tiemco 2487 or Scud hook of choice Size #12-#18.
Tying thread: Black or
brown. Bead: Copper colored tungsten bead.
Abdomen/Body: 70% Hare’s Ear (sheared from mask), mixed with 10% gray squirrel, mixed with 10% Hare’s Ear Antron dubbing, and mixed with 10% assorted Ice Dub/Prism Dub (browns, tan, gray, olive-brown). I use a coffee grinder to mix all my dubbing together.
Rib: Copper Ultra-wire ‘brassie’ sized wire.
Weight: .015 lead wire (approximately 8 wraps).
Collar: Hare’s ear Prism/Ice Dub.This fly is from Torrey Collins of Housatonic River Outfitters. Torrey is one of the best and most knowledgeable nymph fishermen I know. He is extremely open in sharing what’s happening on the river. Stop in and see him at HRO or visit HRO on-line at http://dryflies.com/ .
Begin by placing you bead on the hook. Immediately behind the bead wrap your lead wire. Move it right behind the bead to hold it in place. Form a tapered body with your thread ending with your thread approximately half way down the hook bend. Tie in your copper wire rib. Next dub a body leaving a tiny bit of space behind the bead. Palmer and rib the fly. Tie off the rib. Next dub a collar of Hare’s Ear Prism Dub behind the bead. Apply some cement to the thread and finish your fly with a couple of half hitches. Finally, and perhaps the most important step in the tying process, brush the collar/fly with Velcro so that a fly is enveloped in a hazy veil.
Below is Torrey's instructional video on how to tie this fly.
This fly can also be viewed at the
Housatonic Fly Fishermen’s Association website at www.hffa.net
. If you have any
questions about this fly or would like to submit a Fly of The Month I can be reached at 203
305-3850 or e-mail me at pdinice@frontier.com .
Thursday, May 22, 2014
Fly Fishing the Cape
Sometimes using two flies can be a more productive way of fishing. It's also a lot of fun when there are schoolies around. I probably shouldn't have used two flies in this instance. Catching bigger fish with two flies can be an invitation to breaking your rod. I had a blast though. Best part though was fishing with friends. I've had some wonderful experiences over the years!
Tuesday, May 20, 2014
Paul's June 2014 Fly of the Month
Improved Clouser Minnow
Hook: Mustad 34077 or similar – size to match
forage fish.
Thread: Mono, 3/0 thread, flat waxed nylon, or Fly
Master Plus, with color to match wing.
Eyes: Dumbells – red with black eyes or white with
black eyes.
Belly: Pearl Bill’s
Body Braid or Diamond Braid.
Wing: Pearl
crystal flash (or flash material of choice) and bucktail – color of choice).
You may not agree that this
is an “improved” Clouser variation. My
friends and I tie it this way and we catch more fish with it. Why do we catch more fish with it? When tying the traditional version of this
fly, the body or lower wing is tied along the hook shank and protrudes past the
bend of the hook. Ultimately that lower
wing is going to foul around the hook bend.
Obviously, the “Improved Clouser” will not. The more time your fly is fished correctly in
the water the more fish you’ll catch. It
will also have added action and sink quickly.
Begin by starting your thread
at the eye of the hook. Wrap down to the
bend and tie in your body or diamond braid.
Next affix your dumbbell eyes. Make
sure you leave enough room in front of the eyes to tie in your top wing. I tie my eyes in by creating two bumps on the
top of the hook shank and locating the dumbbell between them. Wrap on each side of the dumbbell eyes and
also figure eight wrap under them. You may
want to apply some glue. I prefer to lock them in with some epoxy. Next apply some cement or crazy glue to the
thread wrapped hook shank and bring your thread to the front of the eyes. Wrap your braid forward to create the body of
the fly. Then, cross wrap over the eyes
and tie off the braid in front of them.
Invert the fly so the eyes are on the bottom of the hook. Begin your wing by tying in your bucktail
wing. Use colors or color of choice. Next,
top the wing with your flash material of choice. Finally create a head with
your thread and tie off/whip finish the fly.
Apply epoxy or head cement to the head.
This fly bounces on the bottom and you want to make it as durable as you
can.
Vary your retrieves, dead drift it in currents, it all works!
This fly can also be viewed
at the Housatonic Fly Fishermen’s Association website at www.hffa.net
. If you have any questions about this
fly or would like to submit a Fly of The Month I can be reached at
203 305-3850 or e-mail me at pdinice@frontier.com
.
Tuesday, April 29, 2014
Lower Housatonic Fishing Report April 29, 2014
Hi All, I fished at the mouth of the River after work yesterday. What beautiful day and afternoon. The fish co-operated too. We landed a ton of fish. The two biggest got away of course, one almost to hand, right around 30”. The biggest I landed was a chunky 26”er. I had the honor of fishing with internet Fishing Star Bear Cochrane and CT/RI’s own John Potter. Also present Wayne Gustafson of the HFFA. Everyone was into fish. One of the best days of the year so far.tight lines. Paul
Subscribe to:
Posts (Atom)