Paul's January 2017 Fly of the Month

Pliva Perdigon Nymph

Hook:  Nymph Hook of choice Size #12-#16. 

Bead:  Copper, silver or gold tungsten 2.3 to 3.3 mm tungsten bead.

Additional Weight:  0.015” lead wire.

Tail:  Coq de leon fibers.

Body and thread:  Olive Veevus body quill.

Rib:   Chartreuse Veevus 140D power thread.

Hot Spot:  Fluorescent orange thread.

Wing case:  Black nail polish.

Finish:  UV resin.

Varnish:  Hard as nails.

This fly is originated from Spanish fly fishers and is very popular with “euro-nymphers”.  Why?  Well it sinks like a rock and gets down fast, one of the important factors in euro-nymphing.  There is no dubbing or hackle fibers to slow its decent in the water. 

Begin by placing your bead on the hook.  Immediately behind the bead wrap your lead wire.  Make 3-4 wraps with your lead and slide it tight behind the bead.  Move it right behind the bead to hold it in place.  Start your Veevus body quill thread behind the lead.  Tie in your coq de leon fibers for your tail.  Next, tie in your chartreuse rib.  Form a tapered body with your body quill.  Tie it off behind the bead.  Start your fluorescent orange thread behind the eye.  Using even wraps, rib the fly with your chartreuse thread. Tie and cut it off.  Wrap and form your hot spot with your orange fluorescent thread.  Whip finish and cut off.  With black nail polish paint a wing case on the top of the fly.  Coat the entire fly with UV resin, then harden the finish with your UV lamp.  Finally, coat the entire fly with “Hard as Nails” clear polish.  This will help prevent your UV resin from clouding or cracking. 

Devin Olsen of Fly Tying 123 has a great instructional video on how to tie this fly at below:

The video and instructions on how to tie this fly can also be viewed at www.tightlinesflyfishing.blogspot.com .  If you have any questions about this fly or would like to submit a Fly of The Month I can be reached at 203 305-3850 or e-mail me at pdinice@frontier.com .

Paul's December 2016 Fly of the Month

Marts CdL Hen Caddis Emerger

Hook:  Diiachi 1180 Size#16

Tying thread:   Dark Grey or Brown 8/0 Uni Thread.

Body:  Tan Superfine Dubbing.

Underwing:  Cul de Leon rooster barbs, dark pardo (optional).

Flatwing:  Cul de Leon hen neck hackle, speckled brown.

Hackle 1:  CDC natural Grey.

Hackle 2:  Cul de Leon hen neck hackle, speckled brown.

The past few years I have “re-discovered” fishing wet flies.  I started out fishing them a lot because they were easy to tie.  Then I kind of got away from them during my fly fishing journey.  Glad I’m back to using them.  Although this particular fly is characterized as an emerger, I look at it more as a wet fly fished in the surface film.  This fly was invented by a gentleman named Martin Westbeek.  It’s the hackle materials that make this fly “come to life”.  I’ve had some pretty successful days with it. 

I wouldn’t call this an easy tie, but it’s well worth the effort.  To begin tying this fly start your thread behind hook eye and wrap down to the point on the hook shank even with barb of the hook.   Next, dub a thin tapered body, leaving the last 1/3^rd of the hook shank (behind the eye) without any dubbing.   This will be the base for your wing and hackle materials.  If you like, tie in a few rooster CdL feather fibers as your underwing.  You are now going to prepare your flatwing.  Take a hen neck hackle and stroke enough fibers in the opposite direction to form a wing.  Hold the fibers in place and lash it down on the  hook shank.  The ‘flatwing’ should extend beyond the hook shank approximately 1/3^rd the hook shank.  Cut off the tip of the feather and the ‘butt’ end after the tie down point.  Form an even base behind the hook eye for your hackles.  Next, tie in your CDC feather by the tip.   Stroke the fibers back and then make a few closely spaced wraps.  The barbs should point to the bend of the hook.  Tie it off and trim the ‘butt’ end of the CDC hackle.  Next, prepare a Coq de Leon hen feather in the same manner.  Tie it in by the butt end.  Make two wraps with the feather and tie it off.  Trim off the ‘butt’ end and whip finish the fly.  You may apply a drop of head cement if you  wish. 

Below is an instructional video on how to tie this fly:

If you have any questions about this fly or would like to submit a Fly of the Month, I can be reached at 203 305-3850 or e-mail me at pdinice@frontier.com . 



Paul's November 2016 Fly of the Month

Birds Nest

Hook:  Diiachi 1710 in sizes #12 to 16 (or hook of choice).

Thread:  Tan 6/0 or 8/0.

Weight (optional):  5-6 lead wraps starting 1/3 hook shank length from eye.

Tail:  Mallard or wood duck fibers, bronze in color (or to match natural).

Rib:  Copper wire.

Abdomen:  Grey/tan Australian possum dubbing or buggy nymph dubbing of  choice.

Hackle:  Mallard or wood duck fibers

Thorax:  Same as the Abdomen but dubbed buggy with a dubbing loop

You want to catch fish?  USE THIS FLY!  Many have said that this fly is not really a nymph, nor is it a winged wet fly.  It's more of a hybrid that really catches fish.  I've fished it as a nymph, but have had far more productive days fishing it as a wet fly beneath the surface film.  The birds nest is a fly pattern created in 1959 by a gentleman by the name of Cal Bird.  He fished it on the Truckee River in California.  There are only a few materials to this pattern and it's a very easy tie.  There are other versions of this fly, like the Depth Charge Bird's Nest, but it's more like a traditional bead head nymph.  This hybrid version is what I love to fish.

When tying this fly you have the option of tying it with or without lead weight.  For larger sizes I usually put a few wraps of lead at the center of the hook shank.  Smaller sizes I tie without the lead.  By the way it's a great pattern to tie in smaller sizes.  What's great about this fly is you can adapt the size and colors to mimic any bug hatch.  If you use lead, cover it with thread wraps, if not, begin your thread approximately 2/3rds up the hook shank.  Tie in your mallard or wood duck fibers.  Tie in your copper wire rib.  Next, dub a slightly tapered body from the tail to where you initially started your thread (2/3reds up the hook shank).  Rib the abdomen with your copper wire.  Tie the wire down and clip off the tag end.  Next affix your wood duck or mallard fibers as "hackle" for this fly.  They should extend to the bend of the hook.  When mounting them square off the tips.  One method to do this is o strip them from the feather and align them.  Next, mount them on the hook.  You want to use some loose wraps at first.  Rotate the fibers around the hook shank as you tighten up your thread.  Next you're going to dub your thorax.  You want it to look very buggy.  To accomplish this I use a dubbing loop for larger flies.  For smaller flies I create a loop by splitting my tying thread off the hook shank.  I place the dubbing material in the loop, spin it and dub the thorax.  Create a small thread head.  Tie it off and apply some head cememt. 

Hans Weilenmannhas has a great instructional video on how to tie this pattern below:

If you have any questions about this fly or would like to submit a pattern of the month I can be reached at pdinice@frontier.com .  



Paul's October 2016 Fly of the Month

Barr's Bouface Streamer

Hook:  TMC 200R Size #4-#12. 

Tying thread:   6/0 (color to match the streamer color).

Bead:  Black tungsten or brass bead.

Wing/Tail:  Pine squirrel zonker strip.

Flash:  Two strips of pearl Flashabou on each side of streamer.

Collar:  Marabou.

Head:  Spiky Squirrel Dubbing.

This is the second time that I have posted a Jim Barr streamer as the Fly of the Month.  The first was his “slumpbuster”, but this spring I’ve really started to fall in love with this pattern.  My friend and HFFA member Will Stone turned me on to it. 

I tie this fly in black, olive, brown, and orange.  So far I’ve had the most success with olive on the Hous and smaller streams.  Some tyers use rabbit zonker strips instead of squirrel.  I’m sure rabbit works fine, but this is a smaller trout streamer and using the smaller condensed squirrel zonkers just seem to be a better fit.

Begin by placing your black bead on the hook.  To get down deeper you can use a tungsten bead instead of a brass one.    Take 6-7 wraps of .015 lead behind the bead.  Push it up tight behind the bead and give it a coat with ‘hard as nails’.  Next start your thread behind the bead and make tight wraps to down to the bend in the hook (leave it even with the hook barb).  You will be tying in your wing at the bend of the hook.  Cut a pine squirrel zonker strip to mount on the hook shank.  The length should extend from just behind the bead to approximately 2-3 hook gaps length beyond the bend of the hook.  Separate the wing fibers with your fingers and lash the back end of the wing onto the hook shank between the separated squirrel fibers.  Apply a drop of glue to the wraps.  Lift the wing and wrap your thread forward to the front tie in point (a hook eye length behind the bead).  I usually strip the squirrel hairs/fibers off the very tip of the zonker strip to ensure that the thread really binds down the wing.  Secure the front part of the wing with numerous thread wraps.  Apply another drop of head cement to them.  Next, tie in two (2) pieces of pearl flash-a-bou on each side of the fly.  They should extend from the front wing tie in point to the end of the zonker strip.  Next, tie in a marabou feather on each side of the fly at the same tie in point.  The tip of the feather should extend to the hook barb.   Trim the butt ends of the marabou feathers leaving enough room for a dubbed head.  Finally, dub a head with spiky squirrel dubbing (or if you want a little flash use laser or ice dubbing).  Whip finish the fly and apply a drop of head cement to the final wraps.

My favorite way to fish this streamer is to cast it across stream and let it drift down below me.  Keep it in the run below you and let it freely dangle in the current.  You’ll be amazed at the results of this fishing technique. 

Ryan Keyes of RK Fly design has a great video on how to tie this fly below:

You can click on any of the pictures on this site to enlarge them.

If you have any questions about this fly or would like to submit a Fly of the Month, I can be reached at 203 305-3850 or e-mail me at pdinice@frontier.com . 

Paul's September 2016 Fly of the Month

Rats Nest

Hook:  TMC 2302 or 2312 Size #6-#10. 

Tying thread:   UTC 140 in Grey Brown.

Bead:  Black Tungsten.

Body & Tail:   Senyo Olive Laser Dub #263.

Rib:  Olive Flexi Floss.

This fly imitates a crane fly larva.  What’s a crane fly you might ask?  Well it’s those big oversized mosquito like bugs you see dangling on the surface of the water.  They can reach a length of 2 ½” with a wingspan of 3”.  They are a grayish olive brown and the trout on the Farmington River love them!  Besides being a crane fly nymph imitation, this fly has a buggyness about it that trout can’t resist.  It was developed by CT’s own Rich Strolis.  Rich is a well known Housatonic & Farmington River Guide, nationally known fly tier, and author.  His articles have appeared in ‘Fly Fisherman’ & ‘Eastern Fly Fishing’ magazines.  He is also the author of the book ‘Catching Shadows: Tying Flies For The Toughest Fish and Strategies For Fishing Them’.  I strongly recommend visiting his website at www.catchingshadows.com . 

This is a very simple fly to tie.  It consists of only a few materials, Laser Dub, Flexi Floss, a bead and some lead weight.  Begin by placing your black tungsten bead on the hook.  Behind it lay down wraps of lead all the way down to the shank, until it’s even with the hook barb.  Next, tie on your thread.  Wrap up and down your lead wraps a few times.  Leave it behind the bead.  Prepare a clump of Laser Dub, approximately (2) two inches in length, and about the thickness of a pencil.  Tie it in right behind the bead.  You want to tie it with wraps in the middle of the clump. Next, double it over and stroke all the fibers back towards the bend.  Shape and create a uniform body the length of the hook shank.  Take your thread and, with broad wraps, palmer it back towards the hook bend.  Stop right above the hook barb and make a few additional wraps with your thread.  In the process you must have enough dubbing material to form a tail beyond the hook bend.  The tail should be at least a hook gap length beyond the bend of the hook.  You can tear any excess dubbing material from the tail if it is too long.  Next, tie in your Flexi Floss rib.  Make a dubbing loop with your thread at the rib tie in point.  Advance your thread so that it is behind the bead.   Place clumps of olive laser dubbing in the dubbing loop and spin a dense buggy ‘brush’.  There’s a number of fly tying tools that are available to do this.  Once you create your dubbing brush/rope, advance and wrap it forward to behind the bead.  You should have a uniform body.  Tie the dubbing rope off with multiple wraps of thread.  Leave your thread behind the bead.  Next, palmer your rib forward with uniform wraps.  Tie the rib off behind the bead.  Whip finish your fly and apply a drop of head cement to your final wraps.  Finally, take a Velcro brush or a tooth brush, and stroke out the material to give the fly a buggy and veiled appearance. 

To fish this fly, nymph it, swing it like a wet fly, or strip it back like a streamer.   It’s all good and it all works.  Rich Strolis has a great instructional video on how to tie this pattern on Vimeo.   Just click on this link  https://vimeo.com/145225238 .

If you have any questions about this fly or would like to submit a pattern of the month I can be reached at 203 305-3850 or e-mail me at pdinice@frontier.com . 



Paul's June 2016 Fly of the Month

Tungsten Torpedo



Hook:  Jig Hook Size #14 to#18.  (I use Allen Fly Fishing J100 BL hooks.)

Tying thread:   Olive 8/0 Uni Thread.

Bead:  Gold Tungsten Bead, slotted or regular.  (I also use copper & rainbow colored beads).

Weight:  5-6 wraps of .015 lead behind the bead.

Tail:  Cul de Leon feather fibers.  (I’ve also used wood duck).

Abdomen/Body:  Olive Thread.

Rib #1:   Small Uni Wire - Gold.

Rib #2:   Sulky Metallic Black Tinsel.  (This is a thin flash material.  If it isn’t

                available at your local fly shop many craft stores carry it.)

Thorax:  Synthetic black Peacock dubbing.

Here’s is yet another great nymph pattern tied on a jig hook with a tungsten bead.  I’ve been fly fishing for a number of years, but this year I’m having my best spring ever bringing trout to the net.  Why?  Well I’ve done two things completely different from what I’ve done in the past.  The first is that I’ve been making my own “euro-nymphing” specific leaders.  (Saving some money doing that too!)  The second is that I’m fishing a lot of flies with tungsten beads tied on a jig hook.  Not only do they get down into the water column, but they have great hooking power as well. 

Begin by placing your gold tungsten bead on the hook.  You can use a “slotted” or traditional bead.  Next begin your thread behind the bead, cover the lead, and wind down to the bend of the hook.  Form a slender tapered body.  Next tie in your Cul de Leon fibers to create a tail.  The tail should be approximately the length of the hook shank.  Next, tie in your ribs, the black tinsel first and the gold wire second.  Bring your thread up behind the bead.  Wrap/palmer your gold wire forward.  Tie it off behind the bead.  Next, palmer/wrap your black tinsel forward.  When you do, be careful to locate your wraps between the previous wraps of gold wire.   Tie it off behind the bead.  You can also coat the body/abdomen with “hard as nails” to give it a little more durability.    Next, dub your thorax behind the bead.  Tie and cut it off.  Cut and tie it off your thread with a whip finish behind the bead.  Apply a drop of head cement if you so desire. 

A gentleman by the name of Gilbert Rowley of Fly tying 123, has a great instructional video on how to tie this pattern below.

If you have any questions about this fly or would like to submit a Fly of the Month, I can be reached at 203 305-3850 or e-mail me at pdinice@frontier.com . 

Paul's May 2016 Fly of the Month

May Day May Fly

(Back & Wine Colored)

 

Hook:  Jig Hook Size #10-#18.  I use Allen Fly Fishing J100 BL hooks.

Tying thread:   UTC 70 denier Black.

Bead:  Black tungsten bead (I like to use rainbow colored beads).

Tail:  Cul de Leon feather fibers.

Abdomen:  Black Holographic tinsel.

Rib:   Wine colored Ultra-wire ‘brassie’ sized wire.

Thorax:  Black Semi-Seal Dubbing (I also use Black Ice Dub).

“You want to get down to the bottom where the fish are?”  Use a jig hook with a tungsten bead.  I’m fishing more and more nymphs tied on a jig hook when I want to fish deep.  Most “tactical” jig hooks are barbless and extremely sharp.  When you’re playing a fish make sure you keep constant tension on your line.  As easy as it is to hook a fish with these sharp hooks, it’s also easy for the hook to dislodge from the fish when line tension is relaxed.

This pattern is very easy to tie.  You don’t have to tie it in Black & Wine.  Try olive with a chartreuse wire rib, brown with a yellow wire rib, or any colors you want to experiment with.  Begin by placing your black tungsten bead on the hook.  You can use a “slotted bead” if you desire.  I find that traditional beads work fine in most cases.  Next begin your thread behind the bead and wind down to the bend of the hook.  Tie in your Cul de Leon fibers to create a tail.  The tail should be approximately the length of the hook shank.  Next, tie in your wine colored wire for a rib.  Tie in a strand of Black holographic tinsel to be used for the abdomen.   Bring your thread up behind the bead.  Wrap your black tinsel forward to create your abdomen.  You are going to leave enough room to dub your thorax behind the bead.  Tie and cut it off.  Rib the abdomen with your wine colored wire.  Cut and tie it off.  Next dub your black thorax.  Whip finish behind the bead.  Apply a drop of head cement if you so desire.

Below is a great instructional video by Gilbert Rowley of Fly tying 123 on how to tie this pattern:

If you have any questions about this fly or would like to submit a Fly of the Month, I can be reached at 203 305-3850 or e-mail me at pdinice@frontier.com .